To secure decorative statues around children, keep fragile or heavy pieces out of reach, anchor the furniture they stand on and use fixings suited to each statue and its base. Adhesive putty alone won't reliably stop a child from pulling a piece over. If you can't secure a statue properly, move it into inaccessible storage or a suitable locked display cabinet.
Which statues need extra care?
Start by checking each statue’s material, shape and condition. A solid stone figure can cause injury if it falls, while ceramic or glass can break into sharp pieces. Resin statues may be lighter, but projecting fingers, horns and decorative details can still snap off.
Pay particular attention to a narrow or uneven base. Tall figures, raised arms and off-centre poses can make a statue easier to overturn. Weight alone doesn't make a piece stable, especially when much of that weight sits above a small base.
- Remove pieces with loose beads, bells, stones or detachable accessories that a child could put in their mouth.
- Keep pointed weapons, antlers and sharp metal details away from edges children can reach and areas where they play.
- Check handcrafted bases for rocking, cracks, weak joints and poorly attached plinths.
- Move valuable, repaired or unusually fragile pieces into inaccessible storage if you can't protect them adequately.
Keep small detachable decorations out of a young child’s reach. The U.S. Consumer Product Safety Commission identifies small parts as a choking hazard for children under three. Don't assume an ornament is safe for a child to put in their mouth just because it resembles a toy.
Where should you place decorative statues?
Choose a position children can't reach directly or by climbing. They may still be able to reach a high shelf above a sofa, bed or low cupboard. Keep statues away from window ledges, staircase edges and surfaces beside areas where children play.
Height is not enough if a falling statue could land on someone. Avoid displaying heavy pieces above beds, cots, seating or changing areas. Don't place a statue near the edge of a console table simply because the table is taller than your child.
For small collections, consider a locked display cabinet with shelves secured in place and safety glazing. Anchor the cabinet itself, and keep its key out of reach. Glass doors restrict access, but they don't make an unstable cabinet safe.
Remove runners, trailing cloths and dangling light cables from the display. A child can pull on these and bring down objects without touching them. Keep stools and movable chairs away from the area rather than relying on instructions not to climb.
How should you anchor display furniture?
A statue fixed to an unsecured cabinet can still fall with the cabinet. The U.S. Consumer Product Safety Commission’s Anchor It campaign recommends anchoring furniture to help prevent tip-over injuries. Secure the furniture and the statue separately.
Use the furniture manufacturer’s anti-tip fittings and installation instructions where available. Choose wall fixings that suit your wall construction: you can't substitute a plasterboard fixing for one intended for solid masonry. If you can't identify the wall type or a suitable fixing point, ask a competent installer.
Check the shelf or tabletop’s stated load capacity before adding a stone or metal statue. Include the weight of other objects on the same shelf. Don't use a shelf with sagging boards, loose brackets or damaged joints, even if the statue itself appears steady.
Which fixings should you use for statues?
Museum putty offers only extra support; it doesn't replace keeping a dangerous object out of reach. Some display putties, waxes and gels can reduce accidental movement, but their suitability depends on the object’s weight, base, surface finish and the product instructions. Don't treat them as child-resistant restraints.
Choose a fixing method for each piece rather than using the same adhesive throughout your collection.
- For a small, low-risk ornament, use a compatible display product only on the surfaces and within the limits specified by its manufacturer.
- For a statue with manufacturer-provided mounting holes, use the specified brackets or fasteners and a suitable supporting surface.
- For a large, valuable or irregularly shaped piece, ask a professional mount maker or installer to design a discreet mechanical restraint.
- For a piece that you can't reliably secure, move it into inaccessible storage rather than improvising a fixing.
You may stain porous stone, unglazed terracotta, painted wood and gilded finishes or damage their finish when you apply or remove adhesive products. Test only as the product instructions permit, and consult a conservator before applying anything to an antique or delicate handcrafted finish.
Avoid household tape, suction cups and hot glue as safety restraints. Don't drill through a statue or tighten a clamp around a fragile limb. These methods can damage the piece without securing it reliably.
How should you secure large and heavy statues?
A floor-standing statue isn't automatically safer than one on a shelf. Children can push it, pull projecting parts or try to climb it. A raised pedestal creates another point where the display could tip, so ask a professional to assess both the statue and the pedestal.
Ask the installer to assess the centre of gravity, contact between the base and supporting surface, mounting points and supporting floor or wall. They should attach restraints only to structurally suitable parts, not decorative projections. If you rent the property, obtain the necessary permission before making permanent alterations.
If a large statue has no suitable fixing points, keep children away from it until a professional provides a workable solution. Don't improvise with loose weights or an unsecured decorative plinth.
When should you check statue displays?
Before buying, ask for the statue’s dimensions, weight, base measurements and mounting details. Choose a broad, level base and securely attached details. Check the actual piece where possible, since handmade objects can differ from the display sample.
Inspect existing displays during routine cleaning and after you move furniture, change the display or notice a child pulling at it. Look for loose fasteners, shifting adhesive, cracks, wobbling bases and peeling or lifting finishes. Stop using the display until you correct any fault.
Check what your child can reach as they start standing, climbing and moving chairs. Teach children not to pull or climb on displays, but don't rely on supervision alone to make up for an unstable statue or unsecured furniture.
Sources
- U.S. Consumer Product Safety Commission (cpsc.gov)
- U.S. Consumer Product Safety Commission’s Anchor It campaign (anchorit.gov)