To pack fragile statues when moving house, cover them with suitable soft wrapping, cushion delicate projecting parts without pressing on them, and secure each piece in a rigid box. Double-box vulnerable pieces, and hire a specialist packer for heavy, valuable or unusually shaped statues that need fitted supports or a crate.
Choose the right packing materials for statues
Use clean materials rather than newspaper, old packing chips or stained cloth. Printed paper can transfer ink, while dirty wrapping can scratch polished surfaces. Gather your supplies before moving a statue from its display position.
- Plain, acid-free tissue for stable, dry surfaces that can tolerate light contact.
- Clean, soft polyethylene foam for cushioning and separating surfaces.
- Bubble wrap for outer cushioning, not direct contact with delicate finishes.
- Strong corrugated cartons, with double-wall boxes for heavier pieces.
- Firm foam blocks or pads to fill gaps and support the packed statue.
- Packing tape, scissors, labels and a marker for sealing and identifying boxes.
Choose a box that leaves room for cushioning on every side, including above and below the statue. Allowing around 5 to 8 cm is a useful starting point for a small, lightweight piece, but it doesn't guarantee protection. For heavy stone or metal statues, use firmer supports and a box or crate rated for the packed weight.
Check the statue before lifting it
Photograph the statue from several angles, including its underside if you can inspect it safely. Record existing chips, cracks, loose joints and earlier repairs. You can use these photographs to show the mover its condition and check it after delivery.
Remove loose dust with a soft brush only if the finish is stable. Don't wash, polish or oil the piece just before packing. If paint flakes, powder comes away or a repaired joint moves, stop and consult an objects conservator before wrapping it.
Support the main body and base when lifting, rather than gripping a head, arm, trunk or decorative attachment. The Canadian Conservation Institute advises supporting fragile objects securely and avoiding weak points when moving them. Never assume that a statue is still firmly attached to its pedestal.
Clear a route to a padded work surface first. Remove detachable accessories only if they are designed to come off easily; photograph their positions and label their separate packets. Don't force tight fittings or dismantle glued joints.
How to wrap fragile statues
Use the first layer to protect the finish and outer layers to absorb knocks. Wrap loosely enough to avoid pulling against details, but securely enough that the wrapping cannot slide off. Keep all adhesive tape on the wrapping, never on the statue.
For glazed ceramic or porcelain in good condition, start with plain tissue or suitable soft foam, then add outer cushioning. Unglazed clay and plaster can shed powder or catch on rough wrapping, so minimise rubbing. Avoid trapping residual moisture in plastic if you've recently cleaned a piece.
For painted wood, gilded surfaces and decorative coatings, avoid direct contact with bubble wrap. Plastic can stick to certain coatings or leave impressions under pressure. If a finish is flaking, tacky or exceptionally delicate, ask a conservator for advice. You may need a support that keeps wrapping away from the surface.
Support resin statues carefully too: a thick body does not make thin fingers or ornaments strong. Protect polished stone and metal from scratches, and check their weight rather than judging by size alone. A compact stone carving can be too heavy for an ordinary carton.
Protect fingers, wings, antlers, trunks and other projecting parts with small, loosely fitted cushioning pads. Build support around them rather than winding tight layers over them. Where possible, rest the packaging against stronger areas of the body, leaving space around fragile tips.
How to box each statue separately
Pack one statue per inner box whenever possible. Two individually wrapped pieces can still strike each other if they share an open space. Pack detachable accessories in separate, labelled packets, and keep them apart from the statue with firm cushioning or a divider.
- Place a firm cushioning layer across the bottom of the box.
- Lower the wrapped statue into a well-supported position, usually upright if its base is sound.
- Fit cushioning around sturdy areas so the body cannot slide or tip.
- Leave space around projecting parts and fill surrounding gaps without pressing against them.
- Add top cushioning, close the flaps without force and seal every opening.
- Label the box with its contents, show which way up it should stay and clearly mark that nothing should be stacked on it.
Before sealing, gently tilt the box a little while keeping it supported. If you feel movement, adjust the internal supports; don't shake it as a test. You should be able to close the lid without compressing the statue or bending its details.
For extra protection, use double boxing: place the sealed inner carton inside a larger carton with cushioning beneath, beside and above it. Keep the inner box away from every outer wall. Double boxing adds impact protection but cannot make up for a weak inner box or inadequate weight support.
When does a statue need a crate?
Hire a specialist packer for tall, top-heavy statues, heavy stone carvings, pieces with broad projecting parts, and valuable or previously repaired objects. A custom crate can support the base and stronger sections while keeping pressure away from delicate details.
Ask the packer how they will secure the statue, protect its finish and prevent the crate from tipping. Share its dimensions, weight if known, material and condition photographs before they arrive. Don't try to strengthen an unsuitable carton by adding more bubble wrap if it cannot carry the load.
How to load and unpack statues safely
Tell the movers which boxes contain statues and point out anything that must remain upright. Place the boxes on a stable, level surface in the vehicle, away from furniture that could shift. Secure them against sliding without tightening straps enough to crush them, and don't stack heavier items on top.
At the new house, prepare a clear, padded surface before opening each box. Cut the tape carefully without pushing the blade deep into the box. Remove cushioning in layers rather than pulling the statue out by its wrapping. Check each layer for small accessories before discarding it.
Lift from supported areas, compare the piece with your photographs and check its base before displaying it. If you find damage, keep the packaging and loose fragments, photograph everything and contact the mover promptly. Don't attempt a quick glue repair on a valuable or intricately finished statue.
Sources
- Canadian Conservation Institute · Canada.ca (canada.ca)